Eric Hodel (drbrain) wrote,
Eric Hodel
drbrain

  • Mood:

Old and busted, New Hotness

Sometime between yesterday night and noonish, the fridge finally crapped out. Yesterday the freezer was about 40-45F, and the fridge was maybe 60, at noon today, they were hotter inside than outside. A new fridge will be delivered between 9 and 1 tomorrow.

A few days ago I broke my local copy of Livelizard, and spent some time trying to fix it but failed. Some of the guts have changed, and soon livelizard will stop working, probably for 1.1 final. I need to get that fixed, its only about a 5 line patch. Also the save to local disk patches need to go in, and some other stuff. I still can't figure out why getString() doesn't work. GRR.

I resurrected my P233, moving it from the mega-AT case to a mini-AT case.

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002
    murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf
[Error: Irreparable invalid markup ('<fpu,vme,de,pse,tsc,msr,mce,cx8,mmx>') in entry. Owner must fix manually. Raw contents below.]

<p>Sometime between yesterday night and noonish, the fridge finally crapped out. Yesterday the freezer was about 40-45F, and the fridge was maybe 60, at noon today, they were hotter inside than outside. A new fridge will be delivered between 9 and 1 tomorrow.

<p>A few days ago I broke my local copy of Livelizard, and spent some time trying to fix it but failed. Some of the guts have changed, and soon livelizard will stop working, probably for 1.1 final. I need to get that fixed, its only about a 5 line patch. Also the save to local disk patches need to go in, and some other stuff. I still can't figure out why getString() doesn't work. GRR.

<p>I resurrected my P233, moving it from the mega-AT case to a mini-AT case.
<lj-cut text="dmesg">
<pre>
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 60411904 (58996K bytes)
Preloaded elf kernel "kernel" at 0xc04d0000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04d009c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00f0a90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xe000-0xe00f at device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd800-0xd81f at device 1.
2 on pci0
pci_cfgintr_search: linked (63) to configured irq 9 at 0:10:0
pci_cfgintr: 0:1 INTD routed to irq 9
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device
1.3 on pci0
pci0: <VGA-compatible display device> at 10.0 irq 9
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xe5000000-0xe50f
ffff,0xe5800000-0xe5800fff irq 12 at device 11.0 on pci0
fxp0: Ethernet address 00:90:27:8b:db:8a
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2930CU SCSI adapter> port 0xd000-0xd0ff mem 0xe4800000-0xe4800fff
irq 11 at device 12.0 on pci0
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xcc000-0xd07ff on
isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ed0 at port 0x300-0x31f iomem 0xd8000 irq 10 drq 0 on isa0
ed0: address 00:40:95:76:a4:d0, type NE2000 (16 bit)
ad0: 1222MB <QUANTUM FIREBALL1280A> [2484/16/63] at ata0-master WDMA2
ad2: 3820MB <Maxtor 84000A6> [7763/16/63] at ata1-master WDMA2
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
da1 at ahc0 bus 0 target 2 lun 0
da1: <COMPAQPC CP30540 20E5> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15)
da1: 511MB (1046532 512 byte sectors: 64H 32S/T 511C)
da2 at ahc0 bus 0 target 5 lun 0
da2: <QUANTUM FIREBALL_TM1280S 300X> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 1222MB (2503872 512 byte sectors: 255H 63S/T 155C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL_TM1280S 300X> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 1222MB (2503872 512 byte sectors: 255H 63S/T 155C)
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <NEC CD-ROM DRIVE:502 2.0r> Removable CD-ROM SCSI-2 device
cd0: 8.064MB/s transfers (8.064MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
</pre>
</lj-cut>
Its got an NEC multisync cdrom drive, caddy, lcd display, play/stop/forward/reverse and volume control! super-sweet. I'm taking it to 4-STABLE now, then will add apache, mod_ruby/php4, mysql, etc to it and make it my firewall box.

<p>It seems kind of silly to be adding a new box in this hot little room.
Subscribe
  • Post a new comment

    Error

    default userpic

    Your reply will be screened

    Your IP address will be recorded 

    When you submit the form an invisible reCAPTCHA check will be performed.
    You must follow the Privacy Policy and Google Terms of use.
  • 0 comments